Panloob na Pangpigil sa Pagbuga (IBOP) OEM Varco Upper 110103-500 at Lower 114706-500
| 30175017-86-4-3-B | KABLE |
| 30175018-86-4-3-B | SERVICE LOOP ASSY, POWER (EEX) 777MCM |
| 30175019-86-200 | KIT, SERVICE LOOP, 777 MCM na may QDS |
| 30175130-200-25-8-B | ASSY, SERVICE LOOP, POWER 313MCM TYPE VFD |
| 30175266-18 | PLATO, KASUTUAN |
| 30175266-6 | PLATO, PRESYON |
| 30175768-1 | ELEMENTO, FILTER, 25-MICRON |
| 30175883-101-4-3-B | ASSY, SERVICE LOOP POWER, 646MCM, VFD (pumapalit sa 116779-101-4-3-B) |
| 30175883-86-4-3-B | ASSY, SERVICE LOOP POWER, 646MCM, VFD |
| 30175915-D2-BT | BALBULA, SOLENOID, ATOS MABABANG TEMPURA |
| 30175915-J2-BT | BALBULA, SOLENOID, ATOS MABABANG TEMPURA |
| 30175915-X2-BT | BALBULA, SOLENOID, ATOS MABABANG TEMPURA |
| 30176000-3 | ELEMENTONG “Y”-SALAYA, HINALONG-ILONG, 2″NPT |
| 30176409-4XN | Karaniwang Bukas ang Lohika ng Balbula |
| 30177083-2 | KIT NG PAG-AAYOS SA ITAAS NA IBOP, EXT STOP-COMPLETE |
| 30177109-04 | Bolt, Balikat, Binago |
| 30177549-1 | KIT, PAG-AAYOS, PAG-KOMISYO (MALAMBOG NA SEAL) |
| 30177549-2 | KIT, PAG-AAYOS, OPERASYONAL (KUMPLETO) |
| 30177550-1 | KIT, PAG-AAYOS, PAG-KOMISYO (MALAMBOG NA SEAL) |
| 30177550-2 | KIT, PAG-AAYOS, OPERASYONAL (KUMPLETO) |
| 30177594-500 | STEM-MACHINING |
| 30178347-600-60-120 | MOTOR, 7.5kW/10HP, ATEX, EExde, LOHER, TDS-11 |
| 30178348-600-60-120 | MOTOR, 3kW/4HP, ATEX, EExde, LOHER, TDS-11 |
| 30178673-2 | |
| 30178768-2 | PAGKABIT NG ENCL-THERMOSTAT, 110MM X 75MM X 55MM |
| 30178854-05 | SPLIT RING, SS |
| 30178890-12 | TAG-INIT, PAGBABALIK NG CALIPER |
| 30178890-152 | EMERGENCY CALIPER ASSY (MTO) |
| 30178890-153 | PANGUNAHING CALIPER ASSY (MTO) |
| 30178890-26 | PAD, SERVICE BRAKE, PSK |
| 30178890-89 | TAG-INIT (MTO) |
| 30178907-261 | MABABANG CLUTCH ASSY (MTO) |
| 30178907-360 | KONEKSYON NG HANGIN AT TUBIG |
| 30181733-BSC | ENCODER-INCREMENTAL, 4VDC, EExd |
| 30181756-200-B | CABLE, DRILLER'S-CONSOLE (EEX/NON-ATEX)IDS |
| 30181884-20 | CORDSET-VARCO 7CX1.5MM NA MAY 7PIN |
| 30181884-9 | PIGTAIL,7/CX1.5MM,W/7PIN-CONN,ATEX EExd |
| 30181893-S-6-C | WASHER, SPRING, METRIC |
| 30181908-20 | CORDSET-VARCO PROFIBUS W/ 7PIN |
| 30181908-9 | ASSY,PIGTAIL,PROFIBUS,7-PIN-CONN(ATEX) |
| 30182002-13 | TAG-INIT |
| 30182002-20 | PANG-ITAAS NA SINGSING |
| 30182026-1 | KIT NG MGA PANG-EKSTRA, KOMIS, KONTROL ABB TDS-911S (MTO) |
| 30183959-200-25-4-B | CABLE ASSY SERVICE LOOP 18 KONDISYON. |
| 30184320-502 | PAGPAPABUSOG |
| 40224461-0031A | KALOSURAHAN, PAG-AARI; MGA TAB NA PATAY NA NAKASAAD; NAKAKASAAD SA PADER |
| 40224461-0037 | ENCL-JBOX, 16″ x 40″ X8″, 316SS, Exe |
| 40224461-0037A | ENCL-JBOX, 16″ x 40″ X8″, 316SS, Exe |
| 40224461-0037B | ENCL-JBOX, 16″ x 40″ X8″, 316SS, Exe |
| 40224461-0037C | ENCL-JBOX, 16″ x 40″ X8″, 316SS, Exe |
| 40224461-0037D | ENCL-JBOX, 16″ x 40″ X8″, 316SS, Exe |
| 40224461-0037E | ENCL-JBOX, 16″ x 40″ X 8″, 316SS, Exe |
| 40943311-030 | MODYUL, ANALOG OUTPUT, 2 CHAN |
| 40943311-034 | PLC-4PT, 24VDC INPUT MODULE 0.2mS |
| 40943311-050 | PLC, I/O;Discrete;In;24 VDC;I/O Pts 8 |
| 40943311-051 | MDL, OUTPUT NG RELAY, 2 CH, 230V AC |
| 40943311-052 | MDL, SUPLAY NG KURYENTE, 0-230V AC/DC |
| 40943311-059 | ENCODER-INTERFACE-CARD, WAGO DIRECTIONAL |
| 40943311-061 | PLC, Komunikasyon; Coupler; Field Bus Coupon |
| 40943311-069 | MDL, DIG OUTPUT, 2-CHAN, DC24V 2.0A MAX OU |
| 40943311-080 | PLC-MOD,PWR SPLY/FUSE,24VDC |
| 40943311-101 | PC-DIGITAL INPUT, 4DI, 24VDC, 0.2ms |
| 40943311-105 | PLC-MOD,FIELD SIDE AC/DC 0-230 |
| 40943311-106 | PLC-DIGITAL OUTPUT, 4D0, 24VDC |
| 40943311-111 | MODYUL, FILTER 24 VDC |
| 46544+70 | SPRING, PRENO BAND ADJUSTING NUT (LUMANG P/N: 46544) |
| 50003-6-C5D | TORNILYO, TAKIP-HEKS HD 10-24 |
| 50003-8-C5D | Tornilyo, Takip, Hex-HD 10-24 |
| 50004-05-C5D | Болт из нерж. стали |
| 50004-06-C5D | TORNILYO, TAKIP-HEX HD NA MAY BINURINA, SOH=0, PN 500 |
| 50004100-3 | Kit ng Buton para sa Kasuotan ng VBJ, 250/350T |
| 50004100-340 | KIT; PAG-INSTALL; LINKBLOCK ADAPTER PARA SA B |
| 50004-10-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50004-10-SD | TORNILYO, TAKIP-HEX HD (UNC-2A) |
| 50004-12-C5D | TORNILYO, TAKIP-HEX HD (UNC-2A) |
| 50004-13-C5D | Tornilyo, Takip-Heksa HD |
| 50004-14-C5D | TORNILYO, TAKIP-HEX HD (UNC-2A) |
| 50004-4-C5D | TORNILYO, TAKIP-HEX HD DR |
| 50004-5-C5D | TORNILYO, TAKIP-HEX HD (UNC-2A) |
| 50004-5-SD | TORNILYO, TAKIP-HEX HD (UNC-2A) |
| 50004-6-C5D | Bolt |
| 50004-8-C5 | Bolt |
| 50004-8-C5D | TORNILYO, TAKIP-HEX HD DR |
| 50005-06-C5D | Болт с головкой под шестигранник |
| 50005-10-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50005-12-C5D | Винт с шестигранной головкой/CAPSCREW,HEX HEAD,3/8-16UNC X 1.25,DH/50005-12-C5D (Varco) |
| 50005-20-C5C | БОЛТ ШЕСТРИГРАННЫЙ |
| 50005-20-C5D | TORNILYO, TAKIP-HEX HD (UNC) |
| 50005-20-C5E | Bolt |
| 50005-20-CD5 | Болт с шестигранной головкой |
| 50005-24-C5D | TORNILYO, TAKIP-HEX HD (UNC) |
| 50005-26-C5D | Bolt |
| 50005-28-C5D | Bolt |
| 50005300Y | BX FRAME #4-35 HYDRAULIC ELEV. 350 TONELADA, |
| 50005351Y158 | 2.3/8″ CASING/PLAIN TUBING BUSHING |
| 50005351Y159 | BUSHING NG ELEVATOR; 2.3/8″; PARA SA BX4-35; SE |
| 50005351Y160 | BUSHING NG ELEVATOR; 2.7/8″ PARA SA BX4-35SET NG 4 |
| 50005351Y161 | 2.7/8″ EU tubing bushing |
| 50005353Y117 | BUSHING NG ELEVATOR; 2.7/8″ PARA SA BX4-35SET NG 4 |
| 50005353Y118 | 2.7/8″ EU DP bushing |
| 50005353Y120 | BUSHING PARA SA BX ELEVATOR FRAME #4-35 SIZE |
| 50005-4-C5D | TORNILYO, TAKIP-HEKS HD |
| 50005-5-C5D | Bolt |
| 50005-6-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50005-8-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50006-05-C5D | Takip ng Tornilyo-Heksagon-Ulo(UNC-24) |
| 50006-06-C5D | Bolt |
| 50006-08-C5D | Bolt |
| 50006-10 | Болт с отверстием под контровку |
| 50006-10-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50006-11-C5D | TORNILYO, TAKIP-HEX HD (UNC) |
| 50006-12-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50006-14-C5D | TORNILYO, TAKIP-HEX HD (UNC) |
| 50006-18-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50006-20-C5D | CAPSCREW: HEX HEAD NA MAY BINURNANG |
| 50006-22-C5D | Болт с шестигранной головкой |
| 50006-24-C8D | Bolt |
| 50006-28-C5D | Bolt |
| 50006-36-C5D | Винт с шестигранной головкой, отверстие в головке под контровку |
| 50006-38-C5C | Bolt |
| 50006-38-C5D | Takip ng Tornilyo-Heksagonal na Ulo |
| 50006-4-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50006-5-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50006-6-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50006-7-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50006-8-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50007-10-C5D | TORNILYO, TAKIP-HEKS HD |
| 50007-14-C5 | TORNILYO, TAKIP-HEX HD (UNC-29) |
| 50007-14-C5D | TORNILYO, TAKIP-HEKS HD |
| 50007-18-C5 | TORNILYO, TAKIP-HEKS HD |
| 50007-8-C5D | Bolt |
| 50008-10-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-10-C5H | Bolt |
| 50008-10-C8D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-11-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-12-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-12-C8D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-12-SD | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-13-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-14-C5 | TORNILYO, TAKIP-HEX HD (UNC) |
| 50008-14-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-15-C5D | Heksagonal na Capscrew (UNC-2A) |
| 50008-16-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-18-C5D | Takip ng Tornilyo na Hex-Head UNC |
| 50008-20-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-30-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-36-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-7-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-8-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50008-9-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50010-10-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50010-12-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50010-14-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50010-16-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50010-18-C5D | TORNILYO, TAKIP-HEX HD NA MAY BINURINA, PHMD-1 |
| 50010-40-C5D | Bolt 50010-40-C5D |
| 50010-44-C5D | Bolt |
| 50010-52-C5D | TORNILYO, TAKIP NA HEX HD NA MAY BINURNANG, TDS |
| 50012-12-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50012-14 | Болт с шестигранной головкой |
| 50012-14-C5D | TORNILYO, TAKIP-HEKS HD |
| 50012-16-C5C | БОЛТ ШЕСТРИГРАННЫЙ |
| 50012-16-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50012-18-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50012-20-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50012-22-C5D | MGA TDS NA MAY BURNING NA SCREW, CAP-HEX HD |
| 50012-24-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50012-26-C5 | TORNILYO, TAKIP-HEX HD (UNC) |
| 50012-26-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50012-28-C5D | TURNILYO, TAKIP NA HEX HEAD NA MAY BINURINA |
| 50014-22-C5D | MGA TDS NA MAY BURNING NA SCREW, CAP-HEX HD |
| 500152NA | PAMPA-BAND NG BRAKE, WALANG ASBESTOS (pumapalit sa 500152AA2) |
| 50016-10-C5D | TORNILYO, TAKIP NA HEX-HEAD (UNC) |
| 50016-12-C5D | TORNILYO, TAKIP-HEKS HD |
| 50016-18 | Болт с шестигранной головкой |
| 50016-18-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50016-20-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50016-20-C8D | Болт с шестигранной головкой |
| 50016-24-C8D | Tornilyo, Takip na Hexa HD na may Butas |
| 50016-26-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50016-28-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50016-32-C8D | TORNILYO, TAKIP-HEX HD (UNC) |
| 50016-48-C5D | TORNILYO, TAKIP-HEX HD NA MAY BINURNANG, TDS |
| 50016-64-C5D | TORNILYO, TAKIP, HEX-HD, NABURINA |
| 50020-24-C5D | TORNILYO, TAKIP-HEX HD NA MAY BINURNANG, TDS |
| 50020-24-C8D | TORNILYO, TAKIP-HEKS HD |
| 50020-29-C5D | TORNILYO, TAKIP-HEX HD NA MAY BINURNANG, TDS |
| 50020-32-C5 | TORNILYO, TAKIP-HEX HD (UNC) |
| 50024-28-C5D | MGA TDS NA MAY BURNING NA SCREW, CAP-HEX HD |
| 50067-040F07 | TORNILYO, TAKIP, HEX-HD, METRIK |
| 50068-012F08 | TORNILYO, TAKIP-HEKS HD |
| 50069-22-F08 | Bolt |
| 50070-025F06 | Tornilyo, Takip-Heksa, Metriko |
| 50070-030-F-06 | Bolt |
| 5008-14-C5D | TURNILYO, TAKIP-HEX HD NA MAY BURINA |
| 50103-10-B | Tornilyo, Takip-SOC HD |
| 50103-16-B | Tornilyo, Cap-SOC HD PH |
| 50103-16-C | Болт под шестигранник |
| 50103-5-BD | TORNILYO, TAKIP, ULO NG SOCKET |
| 50104-08-C5D | Болт с шестигранной головкой |
| 50104-12-C | TORNILYO, TAKIP-SCK HD (UNC) |
| 50104-4-CD | TORNILYO, CAP-SOC HD (UNC) |
| 50104-8-C | TORNILYO, CAP-SOC HD (UNC) |
| 50104-8-S | Tornilyo, Takip, SOC-HD, (UNC) |
| 50105-4-S | TORNILYO, CAP-SOC HD (UNC |
| 50106-12-CD | TORNILYO, CAP-SOC HD (UNC) |
| 50108-10-C | Болт крепления челюсти |
| 50108-10-CD | Takip ng Turnilyo-Ulo ng Socket (UNC-2A) |
| 50108-12-C | TORNILYO, CAP-SOC HD (UNC) |
| 50108-14-C | Tornilyo, Takip-SOC HD |
| 50108-16-C | TURNILYO, CAP-SOC HD TINGNAN ANG TEKSTO |
| 50108-16-C5D | Болт с головкой под шестигранник |
| 50108-16-CD | Tornilyo, Socket ng Takip HD |
| 88732 | GABAY SA PIN |
| 50108-18-C | Tornilyo, Takip-SOC HD |
| 50108-20-C | Tornilyo, Takip-SCK HD |
| 3494 | |
| 50114-22-CD | Tornilyo, Takip SOC-HD |
| 50168-012F06 | TORNILYO, ULO NG SOCKET, METRIK |
| 50168-01F06 | Болт метрический |
| 50182-8-03 | Bolt |
| 50186-10-01 | TORNILYO, BUTONES NG TAKIP HD |
| 50202-B | NUT,HEX,8-32UNC-2B,STD |
| 50202-S | NUT, HEX-STD STAINLESS |
| 50203-C | NUT, HEX-STD (UNC-2B) |
| 50204-B | NUT, HEX STD (UNC-2B) TANSO |
| 50206-B | Gayka |
| 50212-C | NUT, HEX-STD (UNC-2B) 3/4-10 CAD |
| 50216-C | Гайка 1.00-8 |
| 50308-C | NUT, HEX-JAM |
| 50310-C | NUT, HEX-JAM |
| 50312-C | Гайка стопорная |
| 50314-C | HEX JAM NUT, 7/8 |
| 50320-C | NUT, HEX-JAM |
| 50320-G | NUT, HEX-JAM (UNC-2B) |
| 50401-6-S | Шплинт |
| 50412-C | NUT, HEX-HEAVY (UNC-2B) |
| 50416-C | NUT, HEX-HEAVY 1″-8 (UNC-2B) |
| 50506-C | NUT, HEX-SLTD (UNC-2B) |
| 50508-C | NUT, HEX-SLTD (UNC-2B) |
| 50510-C | Gayka |
| 50512-C | NUT, HEX-SLTD, (UNC-2B) |
| 50514-C | NUT, HEX-SLTD, (UNC-2B) |
| 50516-C | NUT, HEX-SLTD (UNCB-2B) |
| 50516-S | Gayka |
| 50520-C | NUT, HEX-SLTD, (PSDS) |
| 50524-C | NUT, HEX-SLTD, (UNC-2B) |
| 50604-6-S | TORNILYO, TAKIP-PATA HD (UNC) |
| 50606-08-C | Болт с плоской головкой |
| 50606-8-C | TORNILYO, TAKIP-FLT HD (UNC) |
| 50608-8-C | TORNILYO, CAP-FL HD (UNC) |
| 50616-20-5d | Patag na ulo ng takip ng tornilyo |
| 50616-20-C | Tornilyo, Takip-FL, Ulo, (UNC) |
| 50616-20-C5D | SCREW CAP *INVALID P/N WALANG PALIT* 没有替代了 |
| 50649-60 | Tornilyo, Mach-Pan HD 10-32 |
| 50649-61 | Tornilyo, Mach-Pan HD |
| 50649-68 | Tornilyo, Makinang Pan HD |
| 50802-RS | WASHER, FLAT |
| 50803-NS | WASHER, FLAT NAROW NON STAND |
| 50803-RS | WASHER, FLAT (AN960-C10L) |
| 50804-NS | FLAT WASHER 1/4 (.281 X .50 X .063) S/S |
| 50804-RC | WASHER, FLAT |
| 50806-NC | WASHER, FLAT |
| 50806-RC | WASHER, PATAPOS NA .063 KALAP. |
| 50808-5N-C | WASHER, FLAT (pumapalit sa 50808-NC-5) |
| 50808-NC | WASHER, FLAT |
| 50808-RC | WASHER, FLAT |
| 50810-NC | Шайба плоская |
| 50810-NS | WASHER: FLAT TDS11SA |
| 50810-RC | WASHER, FLAT |
| 50812-NC | WASHER, FLAT |
| 50812-RC | Washer Flat |
| 50812-WC | WASHER, FLAT WIDE |
| 50814-NC | WASHER, FLAT |
| 50816-NC | WASHER, FLAT |
| 50816-RC | WASHER, FLAT |
| 50816-R-C5 | Sayba |
| 50816-RC-5 | WASHER, FLAT |
| 50820-NC | WASHER, FLAT |
| 50820-RC | WASHER, FLAT |
| 50824-5N-C | WASHER, FLAT (pumapalit sa 50824-NC-5) |
| 50824-RC | WASHER, FLAT |
| 50902-S | WASHER, LOCK-REG STAINLESS |
| 50903-C | WASHER, LOCK-REGULAR, # 10 |
| 50903-S | WASHER, LOCK-REG STAINLESS |
| 50904-C | WASHER, LOCK-REGULAR 1/4″ |
| 50904-S | WASHER, LOCK-REG STAINLESS |
| 50905-C | WASHER, LOCK-REGULAR |
| 50906-C | WASHER, LOCK-REGULAR |
| 50907-C | WASHER, LOCK-REGULAR |
| 50908-C | WASHER, LOCK |
| 50908-S | Гровер |
| 50910-C | WASHER, LOCK-REGULAR |
| 50910-S | Гровер |
| 50912-C | WASHER, LOCK-REGULAR (ALT P/N: 025062) |
| 50914-C | WASHER, LOCK REGULAR |
| 50915-C | Washer Lock-Regular |
| 50916-C | WASHER, LOCK-REGULAR |
| 50920-C | WASHER, LOCK-REGULAR |
| 50924-C | WASHER, LOCK-REGULAR |
| 51007-C | WASHER, LOCK |
| 51008-C | WASHER, MALAKAS ANG LOCK |
| 51012-C | WASHER, MALAKAS ANG LOCK |
| 51016-C | WASHER, MALAKAS ANG LOCK |
| 51024-C | WASHER, MALAKAS ANG LOCK |
| 51103-C | Стопорная шайба |
| 51104-C | WASHER, LOCK HI-COLLAR |
| 51108-C | WASHER, LOCK-HI COLLAR |
| 51132-C | WASHER, LOCK-HI COLLAR |
| 51208-14 | PIN, DOWEL |
| 51208-8 | PIN, DOWEL |
| 51212-16 | PIN, DOWEL |
| 51212-24 | PIN, DOWEL, TDS |
| 51216-12 | PIN, DOWEL (PSDS) |
| 51216-14 | PIN, DOWEL |
| 51216-16 | PIN, DOWEL |
| 51216-20 | PIN, DOWEL |
| 51216-24 | PIN, DOWEL |
| 51216-28 | Shtift |
| 51217-18 | (MT)LOCKWASHER, BEARING |
| 51217-20 | LOCKWASHER, BEARING |
| 51218-18 | (MT)LOCKNUT, BEARING |
| 51218-20 | LOCKNUT, BEARING |
| 51219-02 | Kable ng Spart Ferrule |
| 51219-2 | FERRULE, KABEL .136 x .219 |
| 51220-02 | Kable, Naylon Coated |
| 51220-2 | KABLERA, NAYLON COATED |
| 51221-6-M | PIN, DETENT |
| 51222-05-12 | PIN, SPIROL |
| 51222-12-16 | PIN, SPIROL, 3/4 X 2 |
| 51300-011-B | Набор уплотнений ручного трехпозиционного клапана (Varco) |
| 51300-016-B | O-RING |
| 51300-017-B | O-RING |
| 51300-032-B | O-RING |
| 51300-038-B | O-RING |
| 51300-045-B | O-RING |
| 51300-142-B | O-RING |
| 51300-152-B | O-RING |
| 51300-210-B | O-RING |
| 51300-214-B | O-RING |
| 51300-220-B | O-RING CRANK ASSY, TDS |
| 51300-222-B | O-RING |
| 51300-223-B | O-RING ID 1.599/1.619 THCK |
| 51300-223-F | O-RING |
| 51300-226 | Кольцевое уплотнение |
| 51300-226-B | O-RING |
| 51300-226-U | O-Ring |
| 51300-232-B | O-RING |
| 51300-234-B | O-RING |
| 51300-240-B | O-RING |
| 51300-258-B | O-RING |
| 51300-266 | Кольцо уплотнительное О-образное |
| 51300-273-B | O-RING |
| 51300-276-B | O-RING |
| 51300-277-B | O-RING |
| 51300-278-B | O-RING |
| 51300-279-B | O-RING |
| 51300-320-B | O-RING |
| 51300-348-F | O-RING |
| 51300-349-B | O-RING |
| 51300-366-B | O-RING |
| 51300-381-B | O-RING |
| 51300-383-B | O-RING |
| 51300-385-F | O-RING |
| 51300-387-F | O-RING |
| 51300-392-B | O-RING, TDS |
| 51300-425-B | 0-RING, “S” TUBE, TDS |
| 51300-429-B | O-RING, S-TUBE, TDS |
| 51300-435-B | O-RING |
| 51300-441-B | O-RING, BUNA-N 6.95 ID |
| 51300-446-B | O-RING |
| 51300-458-B | O-RING, TDS |
| 51401-08-S | Pin Cotter |
| 51401-6-S | PIN, COTTER |
| 51401-8-S | PIN, COTTER |
| 51402-08-S | Pin Cotter |
| 51402-10-S | PIN, COTTER |
| 51402-12 | PIN, COTTER |
| 51402-12-S | PIN, COTTER |
| 51402-8-S | PIN, COTTER |
| 51403-08-S | Pin Cotter |
| 51403-14-S | PIN, COTTER |
| 51403-16 | PIN, COTTER |
| 51403-16-S | PIN, COTTER |
| 51403-20 | PIN, COTTER |
| 51403-20-S | Pin Cotter |
| 51405-18-S | COTTER PIN |
| 51405-24 | PIN, COTTER |
Isulat ang iyong mensahe dito at ipadala ito sa amin
Mga kaugnay na produkto
-
109528，(MT)CALIPER,DISC BRAKE,110171,TUBE,ASSY...
Ang VSP ay palaging nakatuon sa pagtiyak na ang aming mga customer ay makakatanggap ng pinakamataas na kalidad ng mga produkto ng oilfield. Kami ay Tagagawa para sa Mga Nangungunang Drive at nag-aalok ito ng iba pang mga kagamitan at serbisyo sa oilfield sa mga kumpanya ng pagbabarena ng langis sa UAE na mahigit 15 taon, kabilang ang tatak na NOV VARCO/ TESCO/ BPM /TPEC/JH SLC/HONGHUA. Pangalan ng Produkto: (MT)CALIPER,DISC BRAKE Tatak: NOV, VARCO Bansang pinagmulan: USA Mga naaangkop na modelo: TDS4SA, TDS8SA, TDS9SA, TDS11SA Numero ng bahagi: 109528,110171,109528-1 Presyo at paghahatid: Con...
-
GEAR,COMPOUND,HELICAL,30158573,30158574,3015857...
88859 GASKET,GEAR,CASING 88946 GEAR,SPUR 88949 SHAFT,GEAR-CHANGER 88956 GASKET,GEAR-CHANGER 110008 (MT)O-RING,.275×50.5 110034 TDS9S CMPD GEAR ALGN TOOL 115040 MGA KAGAMITAN SA PAG-INSTALL NG PINION GEAR 116447 GEAR,HEAD,ROTATING 117603 (MT)PUMP,LUBE,GEARBOX,ASSY,TDS9S 117830 GEAR,PINION 117939 GEAR,HELICAL,PINION 119036 GEAR,HELICAL,BULL 119702 GEAR,PINION 119704 GEAR,HELICAL,COMPOUND 120276 RETAINER, PINION BEARING 30151960 SHAFT, COMPOUND GEAR, PH-100 30156250 GEAR, COMPOUND 40 X 25 (MAKINA) 30...
-
SILINDER, AKTUWOR, IBOP ASSY TDS9S, 110186, 110687...
10846658-001 KIT,PANGKALAHATAN,PAG-ALIS NG REGENERATIVE CIRCUIT NOV 10852289-001 Sleeve Shot Pin NOV 10858306-001 Seal Rod NOV 10859984-001 Seal Piston NOV 10867918-001 ADAPTER (2);KONEKTOR;LALAKI SAE/JIC 37? - NOV 108870-2 TOP, S-PIPE MOUNT NOV 108894-B25 SEAL, KIT, KATAWAN (Para sa-118312-Cyl)*SCD* NOV 108894-B32 KIT, KATAWAN-SEAL, PARKER-CYLINDER*SCD* NOV 108894-B40 MGA SEAL NG KATAWAN (KAPAREHO NG-13718-31) NOV 108894-G13 KIT, ROD-SEAL, BRONZE-GLAND NOV 108894-G17 SEAL, ROD/GLAND SET NOV 108894-G20 SE...
-
110103-500/4.01.23.321/4.01.23.467/4.01.23.800/...
1.03.14.366 Plato ng Pagkasuot 1.03.14.367 Plato ng Pagkasuot 1.03.14.368 Plato ng Pagkasuot 1.03.14.369 Plato ng Pagkasuot 1.03.14.370 Plato ng Pagkasuot 1.03.14.371 Plato ng Pagkasuot 1.03.14.392 Plato ng Proteksyon 1.03.14.394 Plato ng Proteksyon 1.03.14.394 Plato ng Proteksyon 1.03.14.395 Plato ng Proteksyon 1.03.14.501 Roller ng Pagkakahanay ng Likod na Clamp sa Harap na Assembly 1.03.14.502 Roller ng Pagkakahanay ng Likod na Clamp sa Likod na Assembly 1.03.14.503 Roller ng Pagkakahanay ng Likod na Clamp sa Likod na Assembly 1.03.14.504 Roller ng Pagkakahanay ng Likod na Clamp sa Likod na Assembly 1.03.14.601 Piston 1.03.14.602 Piston 1.03.14.603 Pistola...
-
SILINDER, AKTUATOR, IBOP ASSY TDS9S, 120557-501, 11...
Narito ang kalakip na numero ng bahagi ng OEM para sa iyong sanggunian: 110042 SHELL,ACTUATOR (PH50) 110186 CYLINDER,ACTUATOR,IBOP ASSY TDS9S 110703 ACTUATOR ASSY, COUNTER BALANCE 110704 ACTUATOR,ASSY,COUNTER BALANCE 117853 YOKE,IBOP,ACTUATOR 117941 ACTUATOR,ASSY,CLAMP,PH 118336 PIN,ACTUATOR,LINK 118510 ACTUATOR,ASSY,IBOP 119416 ACTUATOR,HYD,3.25DIAX10.3ST 120557 ACTUATOR,DOUBLE-ROD,.25DIAX2.0 121784 ACTUATOR,ASSY,LINK-TILT 122023 ACTUATOR,ASSY,COUNTER BALANCE 122024 ACTUATOR, ASSY, COUNTER BALANCE 125594 CYLINDER, HY...
-
114174 at 114175 Manifold Assembly, Orihinal...
Mga Pangunahing Tungkulin: 1. Tumpak na Kontrol sa Lakas ng Fluid Ang grupo ng solenoid valve ay ginagamit upang simulan, ihinto, baligtarin at i-regulate ang daloy ng drilling fluid/hydraulic oil upang matiyak ang tumpak na pagpapatupad ng pag-ikot ng top drive, lifting ring at iba pang mga aksyon. Sinusuportahan ang multi-channel independent control upang umangkop sa mga kinakailangan sa regulasyon ng torque at pag-synchronize ng bilis ng top drive. 2. Proteksyon sa Kaligtasan ng System Awtomatikong naglalabas ng presyon ang overpressure valve upang maiwasan ang overpressure rupture ng pipeline...